Tech Source Raptor 4000 Series (for Linux) - Manual (Page 32)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 26 Part #65-0271-01
4.6 Selecting Bit-Depths on 4000 Series
Cards
4.6.1 Setting Bit-Depth
The 4000 Class cards support
8-bit
,
24 bit
,
8+8, 8+24
,
mox24
and
mox32
modes. By default, windows will start in
24-
bit
mode on these cards. For an explanation of the various MOX
modes, please see Section 4.6.2.
To set bit-depth to
8
-bit, the
"Mode"
option in the
Device
section
needs to be set to “
8
” and the other values should remain
unchanged.
Section "Device"
Identifier "Rapafp0"
Driver "rapafp"
BusID "PCI:41:0:0"
Card "TSI Raptor 4000"
Option "Device" "/dev/rapafp0"
Option "Mode" "8"
Option "ScaleCursPos" "on"
Screen 0
Option "Head" "0"
# Option "DDCCheck" "off"
# Option "Rotation" "+r"
# Option "Sync" "sx"
# Option "BackingStore"
# Option "SaveUnder"
# Option "TranspColor" "0x0a3246"
EndSection
To set bit-depth to
24
, the
"Mode"
option should be set to
"24":
Section "Device"
Identifier "Rapafp0"
Driver "rapafp"
BusID "PCI:41:0:0"
Card "TSI Raptor 4000"
Option "Device" "/dev/rapafp0"
Option "Mode" "24"
NOTE: The Raptor 3500e does not support 8+8, 8+24 modes
or any of the MOX modes.