Tech Source Raptor 4000 Series (for Linux) User Manual
Page 20
Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc.
14
Part #65-0271-01
SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
# TSI Raptor 4000 Configuration Sections
3.8.1
Monitor Section
This section contains default configuration information for the
monitor and should remain unchanged.
3.8.2 Device Section
Identifier:
Each instance of a Raptor card should have a
unique identifier. This identifier is used in the
Screen section.
NOTE: The
BusID
value in the configuration file will be updated
automatically during software installation. The
BusID
will need to
be updated manually for additional Raptor Series cards or slot
changes. Please see the description below for details.
BusID:
Depending on the machine and the slot the
card is in, it might receive a unique
BusID
.
When the driver attaches, it will print out the
device name and
BusID
. To check the
BusID
, type
dmesg|grep rapafp.
The
output should look similar to the following:
TSI: rapafp0 (BusID 41:0:0) is
RAPTOR 4000 @ 1280x1024
TSI: rapafp1 (BusID 41:0:0) is
RAPTOR 4000 @ 2048x2048.
In the example above, the Raptor 4000 has a