Tech Source Raptor 4000 Series (for Linux) - Manual (Page 30)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 24 Part #65-0271-01
Section "Device"
Identifier "Rapafp1"
Driver "rapafp"
BusID "PCI:17:0:0"
Card "TSI Raptor 4000"
Option "Device" "/dev/rapafp1"
Option "Mode" "24"
Option "ScaleCursPos" "on"
Screen 1
Option "Head" "1"
# Option "DDCCheck" "off"
# Option "Sync" "sx"
# Option "BackingStore"
# Option "SaveUnder"
# Option "TranspColor" "0x0a3246"
EndSection
Section "Screen"
Identifier "Raptor4000-1"
Device "Rapafp1"
Monitor "TSI-FP DVI"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
Section "Screen"
Identifier "Raptor4000-1"
Device "Rapafp1"
Monitor "TSI-FP DVI"
NOTE: The
BusId
and
Device
for each card is determined
by running
dmesg | grep rapafp
.
NOTE: In the
Screen
section of a given Raptor card, the
Device
field must match the
Identifier
field specified in
the corresponding
Device
section.