Tech Source Raptor 4000 Series (for Linux) - Manual (Page 23)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 17 Part #65-0271-01
SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
# TSI Raptor 4000 Configuration Sections
Section "Screen"
Identifier "Raptor4000-1"
Device "Rapafp1"
Monitor "TSI-FP DVI"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 16
Modes "2048x2048"
EndSubSection
SubSection "Display"
Depth 24
Modes "2048x2048"
EndSubSection
EndSection
3.8.4 Server Layout Section
This is the section which specifies the server layout for either
single-screen or multi-screen configuration.
The following example shows the
ServerLayout
Section for a
single-screen configuration on the Raptor 4000 Series device.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Raptor4000-0" 0 0
NOTE: The ServerLayout section should already exist in
your
xorg.conf
file. This section must be modified
manually to include the Raptor card.