Tech Source Raptor 4000 Series (for Linux) - Manual (Page 47)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 41 Part #65-0271-01
6 Frequently Asked Questions
6.1 Frequently Asked Questions
When installing or configuring the Raptor 4000 Series software,
some questions, problems or concerns may arise. Some questions
frequently asked are listed below. If you need further assistance
with any questions or concerns not found in this section, please
contact our technical support group via:
[email protected].
Q. Can the Raptor 4000 Series card be used to display
console video?
A. At this time, the Raptor 4000 Series card cannot be used
to display console video. A proper VGA card and driver
will need to be installed to display console video.
Q. When must I make modifications in order for a Raptor
4000 Series card to start on the X server?
A. Changing slots and adding new cards may require manual
modifications to the X configuration file. Any change in
default settings desired after the driver installation will
need to be manually done. Initial configuration of a Raptor
4000 Series card is done during the installation of the
driver and software. Please refer to Section 3.7 for details
on changing configuration settings.
Q. I am experiencing problems with display of my video.
What should I do?
A. Verify that you are using a monitor with a supported
resolution. The resolutions supported are mentioned in