AML M2500 Decoder - Manual (Page 16)

12
LASER SCANNING
**CAUTION**
ALTHOUGH THE LIGHT EMITTED FROM CLASS II AND CLASS IIA
LASERS IS NOT CONSIDERED HAZARDOUS, AVOID STARING
DIRECTLY INTO THE LIGHT BEAM. EXTENDED EXPOSURE MAY
CAUSE DAMAGE TO YOUR EYES.
Step 1: AIM the LASER at a bar code label. Hold the LASER
approximately 3 to 6 inches from the label.
NOTE: The maximum scanning distance depends on the
label density. Typical scanning distances vary
from 3 to 18 inches.