AML M2500 Decoder - Manual (Page 38)

34
CODE 93
0) CODE 93 DECODER
ON* Enable reading Code 93 labels.
OFF Disable reading Code 93 labels.
1) CONCATENATE MODE
ON Enable CONCATENATE MODE. The concatenate
mode allows the reader to concatenate multiple
bar codes in its buffer, then send them to the
computer just like they were a single bar code.
When a Code 93 label with a leading space is
read, the reader emits two short beeps and buffers
the data without transmission. This process
continues until a Code 93 label without a leading
space is read or 128 characters are buffered. A
Code 93 bar code label that only contains a single
or multiple dashes (minus sign) will clear the
buffer.
OFF* Disable CONCATENATE MODE.
CODE 11
0) CODE 11 DECODER
ON Enable reading CODE 11 labels.
OFF * Disable reading CODE 11 labels.
1) TWO CHECK DIGITS REQUIRED
ON Two valid CHECK DIGITS are required for each
label.
OFF * One valid CHECK DIGIT is required for each label.
2) SEND FIRST CHECK DIGIT
ON Transmit the FIRST CHECK DIGIT.
OFF * Do not transmit the FIRST CHECK DIGIT.
3) SEND SECOND CHECK DIGIT
ON Transmit the SECOND CHECK DIGIT.
OFF * Do not transmit the SECOND CHECK DIGIT.