AML M2500 Decoder User Manual
Page 53
49
OPTIONS #2
0) BAR CODE SPECIAL KEYS
This option applies only to BAR CODE data, preambles,
postambles, and user defined termination characters.
ON
SPECIAL KEY characters will be transmitted in place
of a specific set of ASCII characters. The SPECIAL
KEYS are listed in the Full ASCII Chart provided on
back of the SETUP MENU and in Appendix A.
OFF *
Disable SPECIAL KEYS. (Standard ASCII Characters
are transmitted.)
EXAMPLE: With SPECIAL KEYS ON, the bar code
character "STX" will be transmitted as a right
arrow, having the effect of pressing the " "
key at the keyboard.
NOTE: This option is applicable only if the "TRANSMIT
DATA TYPE = PC SCAN CODES" or if you are
using SOFTCOM keyboard emulation software.
1) KEYBOARD NUM LOCK STATUS
ON
Scan ON to indicate that the keyboard's NUM LOCK
is turned ON.
OFF *
Scan OFF to indicate that the keyboard's NUM LOCK
is turned OFF.
NOTE: This option is applicable only if the "TRANSMIT
DATA TYPE = PC SCAN CODES" or if you are
using SOFTCOM keyboard emulation software.