AML M2500 Decoder - Manual (Page 30)

26
Step 5: If you want to make another change within the SAME
CATEGORY, you can scan another option number (i.e., return to
Step 3 above). If you want to make a change in a DIFFERENT
CATEGORY you MUST scan the new CATEGORY (i.e., return to
Step 2 above and repeat the steps).
Step 6: When you have finished making all of the changes, you can either:
1) SCAN the EXIT (Save Changes) label to save all the
changes
OR
2) SCAN the EXIT (Ignore Changes) label to exit without saving
any changes.
NOTE: You can reset the reader to the default settings
by performing the following:
1) Scan the START label.
2) Scan the RESET ALL DEFAULTS label.
3) Scan the EXIT (Save Changes) label.