Specifications – AML M2500 Decoder User Manual
Page 58
54
SPECIFICATIONS
BAR CODES SUPPORTED
Auto-discriminates between all of the following codes:
Code 3 of 9 (Code 39)
Extended Code 3 of 9 (Full ASCII)
Interleaved 2 of 5 (Variable and Fixed Length, Check Digit)
UPC-A (Including 2 and 5 Character Supplements)
UPC-E(0), UPC-E(1)
EAN/JAN (Including 2 and 5 Character Supplements)
INPUT DEVICES SUPPORTED
Lasers (Helium-Neon, Visible Laser Diode, Infrared)
CCD Scanners
Wands (Visible and Infrared)
Slot Readers (Or Badge Readers)
Magnetic Stripe Readers (Single or Dual Track)
USER PROGRAMMABLE FEATURES
All features are easily programmed with a bar code menu:
Bar Code Selection:
Preambles/Postambles:
Laser Configuration:
Enable/Disable
Bar Code (15 Chars Max) Laser Time-Out
Length
Mag Stripe (15 Chars Max) Trigger Function
Check Digit
Transmit Delay
Continuous Mode
Start/Stop Transmit
Beep Tone and Length
Mag Stripe Data Format
Inter-Character Delay
RS-232 SERIAL PORT
Baud Rates: 150, 300, 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K
Parity: NONE, ODD, EVEN, MARK
Data Bits: 7 or 8
Signals: Transmit Data, Receive Data, Signal Ground, DTR, RTS, CTS, DSR, DCD
INDICATORS
Audio "BEEP" Indicates Successful Read
A Red/Green LED Indicates Status of Reader
POWER REQUIREMENTS
Power Consumption = 0.5 Watts. (12V Laser Requires 12V Regulated Supply)
CONNECTORS
Laser Input: 9 Pin "D" Style
Wand Input: 5 Pin DIN Style
Mag Stripe Input: 8 Pin DIN Style
RS-232 Interface: 25 Pin "D" Style
External Power Input: 2.5 mm Barrel
Connector
PHYSICAL SPECIFICATIONS
Weight: 14
oz
Width: 5 1/8 in
Length: 5 1/4 oz
Height: 1 1/2 in
ENVIRONMENTAL
Operating Temperature:
0
o
to +50
o
C
Storage Temperature:
-30
o
to +70
o
C
Relative Humidity:
5% to 95%
(Non-Condensing)
Codabar
Code 128
Code 93
Code 11
MSI/Plessey