AML M2500 Decoder - Manual (Page 7)

3
Step 6: CONNECTING INPUT DEVICES:
Installing A Wand
Plug the end of the WAND cable into the circular connector labeled
"WAND" on the front panel of the reader.
POWER MSR LASER
AMERICAN
MICROSYSTEMS
MICROSCANNER
WAND
Installing A Laser Scanner
Plug the end of the LASER cable into the square connector labeled
"LASER" located on the front panel of the reader.
NOTE: A 12V LASER will require a 12V regulated
external power supply. See the APPENDIX at
the back of this manual for a description of
"External Power Supply Requirements".
POWER MSR LASER
AMERICAN
MICROSYSTEMS
MICROSCANNER
WAND