H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 145)

11-10
To do… Use the command… Remarks
Configure optional parameters
See Configuring Optional Parameters
for an NQA Test Group
Optional
A DNS test simulates the domain name resolution; therefore, the mapping between the domain name
and the IP address is not saved.
Configuring FTP Tests
FTP tests of an NQA test group are used to test the connection between the NQA client and an FTP
server and the time necessary for the FTP client to transfer a file to or download a file from the FTP
server.
Configuration prerequisites
Before you start FTP tests, configure the FTP server. For example, configure the username and
password that are used to log in to the FTP server. For more information about FTP server configuration,
see FTP Configuration in the Fundamentals Configuration Guide.
Configuring FTP tests
Follow these steps to configure FTP tests:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Configure the test type as FTP and
enter test type view
type ftp Required
Specify the IP address of the FTP
server as the destination address
of FTP request packets
destination ip ip-address
Required
By default, no destination IP
address is configured.
Configure the source IP address of
FTP request packets
source ip ip-address
Required
By default, no source IP address is
specified.
The source IP address must be the
IP address of a local interface. The
local interface must be up;
otherwise, no FTP requests can be
sent out.
Configure the operation type operation { get | put }
Optional
By default, the operation type for
the FTP is get, which means
obtaining files from the FTP server.
Configure a login username username name
Required
By default, no login username is
configured.