H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 45
4-17
Volume
Module
Command
WX6103
LSQM1WCMB0
LSBM1WCM2A0
LSRM1WCM2A1
hot-backup
hellointerval
hellointerval ranges
from 30 to 2000
milliseconds, and
defaults to 2000
milliseconds.
hellointerval ranges
from 30 to 2000
milliseconds, and
defaults to 2000
milliseconds.
hellointerval ranges
from 30 to 2000
milliseconds, and
defaults to 2000
milliseconds.
hellointerval ranges
from 30 to 2000
milliseconds, and
defaults to 2000
milliseconds.
wlan ap-group
group-id ranges from
1 to 640.
group-id ranges from
1 to 640.
group-id ranges from
1 to 640.
group-id ranges from
1 to 640.
wlan
permit-ap-group
group-id ranges from
1 to 640.
group-id ranges from
1 to 640.
group-id ranges from
1 to 640.
group-id ranges from
1 to 640.
display wlan client
Yes Yes
member ipv6
ipv6-address not
supported
Yes
display wlan
mobility-group
Yes
Yes
member ipv6
ipv6-address not
supported
Yes
member
Yes
Yes
member ipv6
ipv6-address not
supported
Yes
mobility-tunnel
Yes
Yes
iactp6 not supported
Yes
undo member
Yes
Yes
undo member ipv6
ipv6-address not
supported
Yes
WLAN roaming
commands
source
Yes
Yes
ipv6 ipv6-address
not supported
Yes
duplex
Yes Yes Yes Yes
display
loopback-detection
Yes Yes Yes Yes
flow-control
Yes Yes Yes Yes
Layer 2 – LAN
Switching Command
Reference
Ethernet interface
commands
jumboframe enable
value ranges from
1600 to 9216 bytes
and defaults to 1600
bytes.
value ranges from
1600 to 4096 bytes
and defaults to 1600
bytes.
value ranges from
1600 to 4096 bytes
and defaults to 1600
bytes.
value ranges from
1600 to 4096 bytes
and defaults to 1600
bytes.