H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 25)

3-11
Volume Module Feature WX6103 LSQM1WCMB0 LSBM1WCM2A0 LSRM1WCM2A1
ACSEI client
configuration
Yes Yes Yes Yes
Access Controller
Module Basic
Configuration Guide Access Controller
Module Basic
Configuration Access Controller
Module Basic
Configuration
No Yes Yes Yes
Feature Matrix for the WX3000 Series
The access controller engine and switching engine on the WX3000 series adopt the OAP architecture. The switching engine is integrated on the access
controller engine as an OAP card. You actually log in to the access controller engine when you log in to the device by default. GE 1/0/1 interfaces on the
WX3024, WX3010 and WX3008 are used to exchange data, status and control information with GE1/0/29 (WX3024), GE1/0/11 (WX3010) or GE1/0/9
(WX3008) on the switching engine. Do not configure services such as QoS rate limiting and 802.1X authentication on these interfaces.
Table 3-3 Feature matrix for the WX3000 series
Volume Module Feature WX3024 WX3010 WX3008
AUX user interface Yes Yes Yes
Console user interface No No No
Login configuration
Telnet
Yes (IPv6 telnet not
supported) Yes (IPv6 telnet not
supported) Yes (IPv6 telnet not
supported)
User interface configuration User interface type
Console user interface
not supported Console user interface
not supported Console user interface
not supported
Fundamentals
Configuration Guide
File management
configuration
Configuration file encryption Yes Yes Yes