H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 35)

4-7
Volume Module Command WX5002 WX5002V2 LS8M1WCMA0 WX5004 LSWM1WCM10 LSWM1WCM20
Layer 2 forwarding
commands
All commands in
the Layer 2
commands
manual
Yes No Yes Yes No No
Port mirroring
commands
All commands in
the port mirroring
commands
manual
Yes Yes No Yes No No
pppoe-server
max-sessions
local-mac
number ranges
from 1 to 2048. number ranges
from 1 to 2048. number ranges
from 1 to 2048.
number
ranges
from 1 to
2048.
number ranges
from 1 to 4096. number ranges
from 1 to 2048.
Layer 2 – WAN
Command
Reference
PPP commands
pppoe-server
max-sessions
total
number ranges
from 1 to 2048
and defaults to
1024. number ranges
from 1 to 4096
and defaults to
4096. number ranges
from 1 to 2048
and defaults to
1024.
number
ranges
from 1 to
65535 and
defaults to
4096.
number ranges
from 1 to 4096
and defaults to
4096. number ranges
from 1 to 2048
and defaults to
1024.
ARP commands
arp
max-learning-nu
m
number ranges
from 0 to 2048. number ranges
from 0 to 4096. number ranges
from 0 to 2048.
number
ranges
from 0 to
8192.
number ranges
from 0 to 2048. number ranges
from 0 to 8192.
DNS commands
All commands in
IPv6 DNS
configuration
commands
Yes Yes Yes Yes Yes Yes
ip redirects
enable
Yes No No No No No
ip ttl-expires
enable
Yes No No No No No
IP performance
optimization
commands
ip unreachables
enable
Yes No No No No No
Layer 3 – IP
Services
Command
Reference
Adjacency table
commands display
adjacent-table
No Yes No Yes Yes Yes