H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 34)

4-6
Volume Module Command WX5002 WX5002V2 LS8M1WCMA0 WX5004 LSWM1WCM10 LSWM1WCM20
jumboframe
enable
value ranges
from 1600 to
9216 bytes and
defaults to 1600
bytes. value ranges
from 1600 to
4096 bytes and
defaults to 1600
bytes. value ranges
from 1600 to
4096 bytes and
defaults to 1600
bytes.
value
ranges
from 1600
to 4096
bytes and
defaults to
1600
bytes.
value ranges
from 1600 to
4096 bytes and
defaults to 1600
bytes. value ranges
from 1600 to
4096 bytes and
defaults to 1600
bytes.
loopback Yes Yes Yes Yes
Only internal is
supported. Only internal is
supported.
loopback-detecti
on control enable
Yes Yes Yes Yes No No
loopback-detecti
on enable
Yes Yes Yes Yes No No
loopback-detecti
on interval-time
Yes Yes Yes Yes No No
shutdown Yes Yes Yes Yes No No
speed Yes Yes No Yes No No
VLAN commands
interface
vlan-interface The maximum
value is 64. The maximum
value is 64. The maximum
value is 64.
The
maximum
value is
512.
The maximum
value is 512. The maximum
value is 64.
MAC Address
Table Commands mac-address
max-mac-count count ranges
from 0 to 4096. count ranges
from 0 to 4096. count ranges
from 0 to 4096.
count
ranges
from 0 to
8192.
count ranges
from 0 to 8192. count ranges
from 0 to 4096.
Link aggregation
commands
All commands in
the link
aggregation
commands
manual
Yes Yes No No No No
MSTP commands
All commands in
the MSTP
commands
manual
No Yes No Yes No No