H3C Technologies H3C SecPath F1000-E - Manual (Page 42)

2
After establishment of the inheritance relationship, the new configuration at the higher level (father) of the
tree will be:
• Inherited if the lower level (child) has no such configuration, or
• Overridden if the lower level (child) has such configuration.
NOTE:
•
The extended address pool database is not organized as a tree.
• The IP address lease does not enjoy the inheritance attribute.
Principles for selecting an address pool
The DHCP server observes the following principles to select an address pool when assigning an IP
address to a client:
1. If there is an address pool where an IP address is statically bound to the MAC address or ID of the
client, the DHCP server will select this address pool and assign the statically bound IP address to
the client. For the configuration of this address pool, refer to section Configuring manual address
allocation .
2. If the receiving interface has an extended address pool referenced, the DHCP server will assign an
IP address from this address pool. If no IP address is available in the address pool, the DHCP
server will fail to assign an address to the client. For the configuration of such an address pool,
refer to section Configuring Dynamic Address Allocation for an Extended Address Pool .
3. Otherwise, the DHCP server will select the smallest common address pool that contains the IP
address of the receiving interface (if the client and the server reside on the same subnet), or the
smallest common address pool that contains the IP address specified in the giaddr field of the
client’s request (if a DHCP relay agent is in-between). If no IP address is available in the address
pool, the DHCP server will fail to assign an address to the client because it cannot assign an IP
address from the father address pool to the client. For the configuration of such address pool, refer
to section
Configuring dynamic address allocation .
For example, two common address pools, 1.1.1.0/24 and 1.1.1.0/25, are configured on the DHCP server.
If the IP address of the interface receiving DHCP requests is 1.1.1.1/25, the DHCP server will select IP
addresses for clients from address pool 1.1.1.0/25. If no IP address is available in the address pool, the
DHCP server will fail to assign addresses to clients. If the IP address of the interface receiving DHCP
requests is 1.1.1.130/25, the DHCP server will select IP addresses for clients from the 1.1.1.0/24 address
pool.
NOTE:
Keep the IP addresses for dynamic allocation within the subnet where the interface of the DHCP server or
DHCP relay agent resides to avoid wrong IP address allocation.
IP Address Allocation Sequence
A DHCP server assigns an IP address to a client according to the following sequence:
1. The IP address manually bound to the client’s MAC address or ID
2. The IP address that was ever assigned to the client
3. The IP address designated by the Option 50 field in a DHCP-DISCOVER message
4. The first assignable IP address found in an extended or a common address pool
5. The IP address that was a conflict or passed its lease duration