H3C Technologies H3C SecPath F1000-E - Manual (Page 43)

3
If no IP address is assignable, the server does not respond.
NOTE:
Option 50 is the requested IP address field in DHCP-DISCOVER messages. It is padded by the client to
specify the IP address that the client wants to obtain. The contents to be padded depend on the client.
DHCP Server Configuration Task List
Complete the following tasks to configure the DHCP server:
Task Remarks
Configuring an Address Pool for the DHCP Server Required
Enabling DHCP Required
Enabling the DHCP Server on an Interface Required
Applying an Extended Address Pool on an Interface
Required by the extended address pool
configuration
When configuring a common address
pool, ignore this task.
Configuring the DHCP Server Security Functions Optional
Configuring the Handling Mode for Option 82 Optional
Enabling Sending of Trap Messages Optional
Configuring an Address Pool for the DHCP Server
Configuration Task List
Complete the following tasks to configure an address pool:
Task Remarks
Creating a DHCP Address Pool Required
Configuring manual address allocation Configuring an Address
Allocation Mode for a
Common Address Pool
Configuring dynamic address allocation
Required to configure either
of the two for the common
address pool configuration
Configuring Dynamic Address Allocation for an Extended Address Pool
Required for the extended
address pool configuration
Configuring a Domain Name Suffix for the Client
Configuring DNS Servers for the Client
Configuring WINS Servers and NetBIOS Node Type for the Client
Configuring the BIMS Server Information for the Client
Configuring Gateways for the Client
Configuring Option 184 Parameters for the Client with Voice Service
Configuring Self-Defined DHCP Options
Optional