H3C Technologies H3C SecPath F1000-E - Manual (Page 61)

3
If a client’s
requesting
message has…
Handling
strategy
Padding format The DHCP relay agent will…
user-defined
Forward the message after replacing the
original Option 82 with the user-defined
Option 82.
— normal
Forward the message after adding the
Option 82 padded in normal format.
— verbose
Forward the message after adding the
Option 82 padded in verbose format.
no Option 82
— user-defined
Forward the message after adding the
user-defined Option 82.
DHCP Relay Agent Configuration Task List
Complete the following tasks to configure the DHCP relay agent:
Task Remarks
Enabling DHCP Required
Enabling the DHCP Relay Agent on an Interface Required
Correlating a DHCP Server Group with a Relay Agent Interface Required
Configuring the DHCP Relay Agent Security Functions Optional
Enabling Offline Detection Optional
Configuring the DHCP Relay Agent to Send DHCP-RELEASE Messages Optional
Configuring the DHCP Relay Agent to Support Option 82 Optional
Enabling DHCP
Enable DHCP before performing other DHCP-related configurations.
Follow these steps to enable DHCP:
To do… Use the command… Remarks
Enter system view system-view —
Enable DHCP dhcp enable
Required
Disabled by default.
Enabling the DHCP Relay Agent on an Interface
With this task completed, upon receiving a DHCP request from the enabled interface, the relay agent will
forward the request to a DHCP server for address allocation.
Follow these steps to enable the DHCP relay agent on an interface: