Ge copper ethernet port, Ge fiber ethernet port – H3C Technologies H3C SecPath F5000-S Firewall User Manual

Page 69

Advertising
background image

60

Item Specification

Services

Connected to an ASCII terminal

Provides connection to the serial port of a local PC to run the terminal

emulation program

CLI

GE copper Ethernet port

The firewall provides twelve 10/100/1000Base-T copper Ethernet ports.

Table 25 Copper Ethernet port specifications

Item Specification

Connector RJ-45

Standard compliance

802.3, 802.3u, and 802.3ab

Interface type

MDI/MDI-X autosensing

Cable type

Category 5 or higher twisted pair cable

Transmission distance

100 m (328.08 ft)

Interface speed and duplex mode

10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex

NOTE:

The media dependent interface (MDI) standard is typically used on the Ethernet port of network adapters.
The media dependent interface crossover (MDI-X) standard is typically used on hubs or LAN switches.

GE fiber Ethernet port

The firewall provides twelve 1000Base-X fiber Ethernet ports.

Table 26 Fiber Ethernet port specifications

Item Specification

Connector type

LC

Transceiver module type

SFP

Standard compliance

1000Base-X

Interface speed

1000 Mbps

Duplex mode

Full duplex

Advertising
This manual is related to the following products: