Encoder + server stage, Configure media frame core ask: encoder – Grass Valley Aurora Browse v.7.0 Installation User Manual

Page 115

Advertising

April 6, 2010

Aurora Browse Installation and Configuration Guide

115

Encoder + Server stage

For this configuration stage you configure the MediaFrame server to work together
with the Encoder and NAS from the Encoder stand-alone stage. MDI services are also
required, as configured in the MediaFrame stage.

The portion of the system configured and tested in this stage is illustrated by the
following diagram.

Refer to

“The MediaFrame system” on page 14

for a view of the entire system.

To do the basic configuration and testing of the encoder plus server, do the following:

“Configure Media Frame Core ASK: Encoder” on page 115

“Configure Rules Automation: Encoder” on page 116

“Test: Encoder + Server stage - high-res source” on page 120

Configure Media Frame Core ASK: Encoder

Make sure the encoder’s proxy transfer service is registered with the ASK software
component with a logical name, as explained in

“Configure MediaFrame ASK:

. If ASK is down, you need to manually enter the

names, and they must match exactly. Therefore, where possible, use the drop-down
list to ensure the exact name.

Encoder + Server stage

Aurora Browse

Client