Grass Valley Aurora Browse v.7.0 Installation User Manual
Page 77
Advertising
April 6, 2010
Aurora Browse Installation and Configuration Guide
77
Add encoders to the K2 Storage System
7. At the File System Client Configuration screen, enter the drive letter you wish to
configure as the iSCSI drive on the encoder machine; this letter should be the same
for all machines that are iSCSI clients in this K2 Storage System.
8. Click
Check
. (If you do not click
Check
, some settings are not applied.)
9. Click
Next
.
10.At the iSCSI Initiator Configuration screen, enter client bandwidth:
a. Click
Modify
.
Advertising