Grass Valley Aurora Browse v.7.0 Installation User Manual
Page 98
Advertising
98
Aurora Browse Installation and Configuration Guide
April 6, 2010
Chapter 5 Configuring the system
7. Enter the name of the M-Series server.
8. The default value on the Asset System Dwell Time is 120 seconds.
9. Click
Add
as a managed device.
10.If adding an additional M-Series MDI, increment the port number, e.g. enter 9141.
The following settings enable transfers. You should add all available transfer targets,
as specified in
“Configuring transfer targets” on page 87
.
11.Under Transfer Servers, click
Add
.
12.Use the drop-down list to specify the MDI name.
13.Enter the Transfer Server for the MDI selected above.
14.Leave the Public Address field blank.
15.To put changes into effect, click
Apply
.
16.When prompted to restart the MDI, click
Yes
.
Advertising