Grass Valley Aurora Browse v.7.0 Installation - Manual (Page 76)

76 Aurora Browse Installation and Configuration Guide April 6, 2010
Chapter 5 Configuring the system
a. Enter the machine name of the Aurora Proxy Encoder or SmartBin encoder you
are configuring (such as iron-nb-adv-1 ).
b. Select iSCSI .
c. Click Next .
6. At the Network Configuration screen, click Modify to change the IP address and
subnet of network adapters for this machine, and then click Next . You cannot
configure the adapter over which the K2 System Configuration application is
currently communicating.