Configure avalon mdi – Grass Valley Aurora Browse v.7.0 Installation User Manual
Page 196
Advertising
196
Aurora Browse Installation and Configuration Guide
April 6, 2010
Appendix C Legacy systems
Configure Avalon MDI
Open this tab of the MediaConfig tool locally on the machine that hosts the Avalon
MDI software component.
To configure the Avalon MDI, do the following.
1. Select
Programs | Grass Valley | MediaFrame Config
. Select the MDI Configuration
tab and the Avalon icon.
2. Enter the name of the MediaFrame server.
3. Port 9010 is required. Do not modify.
4. Use the
...
button to location the name of the Avalon MDI.
5. Port 9120
is required.
6. Enter the name or IP address of the Avalon machine.
7. Click
OK
.
NOTE: You no longer need to define FTP for archive sources/destinations.
Advertising