Grass Valley EDIUS Neo 2 - Manual (Page 395)

EDIUS Neo — User Reference Guide 395
Applying Filters to Clips
To correct colors in an entire image, do the following:
1. Select the clip to which the White Balance filter has been applied.
2. Display the Information Palette. For more information concerning the
Information Palette, see Information Palette
on page 443 .
3. In the Information Palette, double-click the White Balance filter.
The White Balance dialog appears (see Figure 469 ).
4. From the Color Picker, select the color to which you wish to adjust a
selected color. See
Figure 475 .
Figure 475. White Balance Color Picker
Note If ‘Auto” is selected, the brightness of the selected color is automatically
determined. Bright colors are adjusted to white and darker colors are
adjusted to black.
5. In the Recorder, select the color which you wish to correct to the color
selected in the color picker.
The color is corrected.
Note Colors may also be adjusted by using the Black, Gray or White balance color
circles and the Saturation and Contrast sliders. For example, select ‘White”
from the color picker and then click a color point in the color wheel that you
want to adjust to white.
To correct colors in a specific range, do the following:
1. Select the clip to which the White Balance filter has been applied.
2. Display the Information Palette. For more information concerning the
Information Palette, see Information Palette
on page 443 .
3. In the Information Palette, double-click the White Balance filter.
The White Balance dialog appears (see Figure 469 ).
4. Select “Color range” from the Color Picker.
5. Select the color range in the Recorder by clicking on a color and holding
down the [
SHIFT ] key while clicking on color points to be included in the
range.