Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 48)

48 NewsBrowse Installation and Configuration Guide 25 May 2004
Chapter 3 Configuring the NewsBrowse System
Test: ASK registration stage
The following test verifies that configuration pages are correctly loading the
configured MDI information.
Test description: Open configuration pages and verify MDI lists.
Run the test as follows:
1. Make sure that the NewsBrowse system is not in use.
2. On the NewsBrowse server, open the Ask Location configuration page. Verify that
it is configured to localhost and port 9010 . These should be the default values. Refer
to “Configure ASK Location: NewsBrowse server” on page 65 .
3. Open the Media Frame Core | Rules Automation page. For the Profile MDI field, click
the … button. After a short pause, a list should appear. Verify that the configured
Profile MDI names are listed. Close the list without selecting anything.
4. Open the Ingest Scheduler | Scheduler page. For the MDI Name field, click the …
button. After a short pause, a list should appear. Verify that the configured Ingest
MDI names are listed. Close the list without selecting anything.
Checklist: ASK registration stage
Use the following check list to verify that the basic configuration and testing of the
ASK registration stage is complete.
" All MDI names and “Device Type” service names are registered with ASK.
" Configuration pages load MDI names.