Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 84)

84 NewsBrowse Installation and Configuration Guide 25 May 2004
Chapter 3 Configuring the NewsBrowse System
Sequential encoder stand-alone stage
For the basic configuration process you configure and test one sequential encoder, one
NAS, and one Profile XP server to work together.
The portion of the NewsBrowse system configured and tested in this basic
configuration process is illustrated by the following diagram.
Refer to “Two tier system diagram” on page 16 for a view of the entire NewsBrowse
system.
To do the basic configuration and testing of a sequential encoder, do the following:
1. “Configure ASK Location: Sequential encoder” on page 85
2. “Configure Transfer Control: Sequential encoder” on page 85
3. “Configure Proxy Asset (NAS): Sequential encoder” on page 85
4. “Configure Media Server: Sequential encoder” on page 86
5. “Configure MPEG encoder: Sequential encoder” on page 86
6. “Test: Sequential encoder stand-alone stage” on page 87
7. “Checklist: Sequential encoder stand-alone stage” on page 88
mpg
Video
Server
Sequential
Encoder
Production Network
mpg
th/sb
AV TC
AV
TC
Network Attached
Storage
D to A