Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 User Manual
Page 78
78
NewsBrowse Installation and Configuration Guide
25 May 2004
Chapter 3 Configuring the NewsBrowse System
1. Make sure that the NewsBrowse system is not in use.
2. Click
Start | Programs | Thomson | NewsBrowse | Diagnostic Tools | Transfer Client
.
The Transfer Client application opens.
3. Configure as follows to check the connection to a NAS machine:
• Host:
localhost
• Port:
9230
4. Click
Connect
. Verify that the …Update… and …Transfer… buttons become
enabled, which means the connection is successful.
5. Configure as follows to transfer/transcode a thumbnail asset from a MPEG asset:
• Source Laid: Enter the path to a MPEG asset on a NAS machine. You can use
an asset created in an earlier test.
• (Source) Format:
video/proxy.mpeg
• Dest Laid: Enter a directory on the local ISS machine. This is for this test only.
The test files are written to the directory.
• (Destination) Format:
stillImage/proxy.thumbnail
6. Select the checkbox to enable the next row, then configure as follows to transfer/
transcode a storyboard asset from a MPEG asset: