Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 51)

25 May 2004 NewsBrowse Installation and Configuration Guide 51
Configure Proxy Asset (NAS): Single-channel encoder
Configure Proxy Asset (NAS): Single-channel encoder
This page specifies the location (on a NAS machine) in which the single-channel
encoder places the proxy MPEG it creates.
When this page opens and when you click a … button, fields and lists are populated
with valid information as currently defined on the ASK settings page and the Proxy
MDI settings page.
If you are doing the initial configuration of the Encoder stand-alone stage and you
have not yet configured Proxy MDI settings (as in the MDI stage), you must type in
the File System Folder path (\\root_nb_nas_n\Media) rather than using the
… button
and then selecting from a list. Refer to “Site-specific configuration tables” on page 34 .
You can ignore error messages about the Proxy MDI information not being available.
Ba
s
ic
A
d
va
nc
ed
Do
n
o
t
m
o
d
ify
http://localhost:280 Single Channel Encoder Proxy Asset Information
! There is but one logical Proxy Managed Device in the system, named
PROXY1.
a
a. PROXY1 can have multiple folders (on multiple machines)
defined as locations for assets.
! Select the path to the folder (\Media) on the NAS (or other storage location)
that receives the MPEG this encoder creates.
! Validates the current configurations with the Proxy MDI settings and saves
changes. Changes are lost if you leave the configuration page without
updating.
Always click Update… buttons after making changes
Start or restart the Thomson Ingest Control service on the single-channel
encoder.