Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 73)

25 May 2004 NewsBrowse Installation and Configuration Guide 73
Add Router Gateway to Ingest Scheduler
Add Router Gateway to Ingest Scheduler
This page make the Router Gateway machine available to the Ingest Scheduler
service.
If you have previously added an ingest channel but have not yet configured its router
destination, you will have to remove the channel and then add it again but with the
router destination configured.
Test: Router Gateway + Server stage
The following test triggers the router controller as part of Profile ingest. A successful
test verifies that the basic configurations are correct.
Test description: Using the NewsBrowse application, use the Router option in
conjunction with Profile ingest.
Run the test as follows:
B
a
si
c
A
d
va
nc
ed
Do
n
o
t mo
d
ify
http:// root_nb_svr:280 Ingest Scheduler Scheduler
! Number of previous days of ingest history
! Minimum back-to-back delay between records on the same channel
! Name (as it is in host table) of machine hosting Router Gateway service
!
8065 . Refer to “Ports and services convention” on page 33 .
! ! Saves changes. Changes are lost if you leave the configuration page without
updating.
! Select the MDI for the encoder. This specifies the encoder as an ingest channel.
! Enter a useful name for the channel. This is displayed in the NewsBrowse
application.
! Select the router destination for the channel.
! ! Adds the above specified encoder as an ingest channel
Currently added ingest channels
! Removes the currently selected ingest channel
! Adds the selected date suffix automatically to high-res clips
! Adds the selected time suffix automatically to high-res clips
! Saves date stamp and time stamp changes
Always click Update… buttons after making changes
Start or restart the Thomson Ingest Scheduler service on the NewsBrowse
server.