Grass Valley NV9641A v.1.0 - Manual (Page 32)

22
Configuration
Panel Options
The following items are the checkbox options under the panel options.
• User-Programmable ID.
Allows the panel ID to be changed locally at the control panel (in menu mode).
• Save Preset Default.
Makes ‘Save Preset’ mode active when the panel reverts to its default state (after a Default
State button is pressed, or when the panel is restarted).
 A ‘Save Preset’ button is needed only when you want the operator to be able to view or
change the mode.
• Hold Preset Default.
Makes “hold” mode active when the panel reverts to its default state (after a Default State
button is pressed, or when the panel is restarted).
 Note: a ‘Hold’ button is needed only when you want the operator to be able to view or
change the mode.
• Enable Destination Lock.
Check ‘Enable Destination Lock’ so that any ‘Destination Lock’ button on the panel will func-
tion.
• Enable Destination Protect.
Check ‘Enable Destination Protect’ so that any ‘Destination Protect’ button on the panel will
function.
• Source (Is) Master Default.
Makes a control-level source the controlling device (or master device) by default. Otherwise,
the destination is the master by default. (The option is specifically for use with NV9000 series
data routers.)
“Source is master” is used for duplication, or broadcast routing, on the control level. “Desti-
nation is master” is for machine-to-machine editing. If you do not select the “source master
default” option, you can place a ‘Source is Master’ button on the panel.
 Note: a ‘Source is Master’ button is a toggle that reverses the direction of data routing
for devices used in data (control) level takes.
• Hide sources not configured on this panel.
Causes the names of source devices that are not presently configured for this particular
panel to be hidden. When another panel changes the source to one not configured for this
panel, this panel displays asterisks instead.
• Deselect all destinations and turn off hold after take.
After selecting many MD destinations (with ‘Hold’ mode on), it can be time-consuming and
error-prone to find them all (and no others) to deselect them after a take. When you enable
this option, the NV9641A does exactly that (and turns off hold mode).
• Jump to multi-dest selection when switching to XY.
Makes the currently selected multi-destination device the preset destination when you
switch from MD mode to X-Y mode.
 The X-Y destination chosen is unpredictable when the panel is in MD “hold” mode and
multiple destinations are selected.