Grass Valley PDR v.2.2 - Manual (Page 141)

Viewing Tape Transport Status
Profile Family 123
4. Enter the logical transport number (0–255).
5. Enter the physical robot position (0–3).
6. Click OK .
7. Click Close when you are done viewing the transport status.
To remove a tape transport from service:
• Click the appropriate Disable button.
To clean a tape transport:
• Click the appropriate Clean button. A tape transport does not need cleaning
until the “Needs Cleaning” message appears beside the Clean button. The
library system will find the first available cleaning cartridge in the system
and use it to clean the selected transport. If the library system is unable to
find the cleaning cartridge—that is, there is no cleaning cartridge in the
library—you will get a message stating that no cleaning cartridge was found.