Grass Valley PDR v.2.2 - Manual (Page 151)

Viewing an Audio Monitor for a Panel
Profile Family 133
Viewing an Audio Monitor for a Panel
The Audio Monitor allows you to monitor the level of an audio signal for a
panel. To view a panel’s audio monitor:
1. Choose Window | Audio Monitor . The Audio dialog box appears, as shown in
Figure 71. There are only two channels in this example, but up to sixteen are
possible.
Figure 71. Audio Monitor dialog box
2. To turn peak hold on or off, choose PeakHold | On or PeakHold | Off . By
default, peak hold is on.
3. To show the record level controls, choose Levels | Show Record Level
Controls . To show play level controls, choose Levels | Show Play Level
Controls . To hide the level controls, choose Levels | Hide Level Controls .
4. To work the controls independently, choose Levels | Independent Controls .
To gang the controls, choose Levels | Ganged Controls .
5. Click the Close button when complete.