Enterasys Networks 6H2xx User Manual
Page 121
Port Redirect Configuration Screen
Chassis Menu Screens
4-21
Frame Format
(Read-Only)
See the current frame format setting: NORMAL, TAGGED, or
UNTAGGED. The default is NORMAL.
•
NORMAL – Frames are redirected in the format that they were
received or transmitted on the source port.
•
TAGGED – Frames are transmitted on the destination port with a
VLAN tag inserted according to the frame classification.
•
UNTAGGED – Frames are transmitted on the destination port
without a VLAN tag regardless of the format of the received frame.
Redirect Errors
(Read-Only)
See whether the corresponding source ports are configured ON to send
frames with errors to the destination ports, or OFF to drop all frames
with errors and only forward traffic without errored frames to the
destination ports. All redirected error frames display in the way they
were received or transmitted on the source port, regardless of the frame
format setting.
NOTE: See
for directions on how to change the settings for the
following fields.
Src Port [n]
(Selectable)
Select the port [n] that is to be changed to a source port. If a port is
currently being redirected, it will not display as a selectable port.
Src Module [n]
(Selectable)
Select the module [n] that is to be changed to a source module.
Dest Port [n]
(Selectable)
Select the port [n] that is to be changed to a destination port. If a port is
currently being redirected, it will not display as a selectable port.
Dest Module [n]
(Selectable)
Select the module [n] that is to be changed to a destination module.
Frame Format
(Selectable)
Select the frame format for the transmission of redirected frames on the
destination port. NORMAL, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format
field for details about each format. The default setting is NORMAL.
Table 4-8
Port Redirect Configuration Screen
Field Descriptions (Continued)
Use this field…
To…