3 interface statistics screen, Interface statistics screen -6, Interface statistics – Enterasys Networks 6H2xx User Manual
Page 324: Section 11.3
Interface Statistics Screen
11-6
Module Statistics Menu Screens
11.3 INTERFACE STATISTICS SCREEN
When to Use
To obtain the MIB-II statistics of all the switch interfaces with the exception of an installed HSIM
or VHSIM.
How to Access
Use the arrow keys to highlight the INTERFACE STATISTICS menu item on the Module
Statistics Menu screen and press ENTER. The Interface Statistics screen,
Frames Fltrd
(Read-Only)
See the number of frames filtered by the interface since the last
power-up or reset.
Frames Frwded
(Read-Only)
See the number of frames forwarded by the interface since the last
power-up or reset.
CLEAR
COUNTERS
(Command)
Temporarily reset all counters of a screen to zero, allowing the user to
observe counter activity over a period of time. For details on how to use
this field, refer to
NOTE: Enterasys Networks HSIMs that support FDDI or WAN gather their own
statistics, and may be viewed via the Local Management screens of the applicable
HSIM. Refer to your HSIM documentation for information on how to access these
screens.
Table 11-2
Switch Statistics Screen Field Descriptions
Use this field…
To…