Enterasys Networks 6H2xx - Manual (Page 261)

Protocol Port Configuration Screen
802.1Q VLAN Configuration Menu Screens 8-35
8.9 PROTOCOL PORT CONFIGURATION SCREEN
When to Use
To perform the following:
• Display the ports.
• Show which ports are set to the line item containing the VID/Classification (Classification Rule)
of interest in the VLAN Classification Configuration screen described in
Section 8.8 .
• Add or remove ports from being associated with the Classification Rule.
• Add ports to the VLAN Forwarding List of the switch module.
How to Access
Use the arrow keys to highlight the line item of interest on the VLAN Classification Configuration
screen and press ENTER. The Protocol Port Configuration screen,
Figure 8-9 , displays.
NOTE: The ports can only be added to the VLAN Forwarding List of an existing VLAN.
If the VLAN does not exist, it must be created before the ports can be assigned to the
VLAN Forwarding List. VLANs are created using the Static VLAN Configuration screen
described in
Section 8.3 .