Module login passwords screen field descriptions – Enterasys Networks 6H2xx User Manual
Page 72
Passwords Screen
3-30
Accessing Local Management
Field Descriptions
Refer to
for a functional description of each screen field.
Table 3-7
Module Login Passwords Screen Field Descriptions
Use this field…
To…
Password
(Modifiable)
Enter the password used to access the device according to an access
policy. For information on how to set the login password, refer to
Access Policy
(Read-Only)
See the access given each password. Possible selections are as follows:
read-only
This password allows read-only access to Local
Management, and excludes access to
security-protected fields of read-write or super-user
authorization.
read-write
This password allows read and write access to Local
Management, excluding security protected fields for
super-user access only.
super-user
This password permits read-write access to Local
Management and allows the user to change all
modifiable parameters including community names, IP
addresses, traps, and SNMP objects.
Switch 8
(Toggle)
Enable or disable the function of hardware switch S8 on the main
board of the device. When set to ENABLED, S8 can be used to clear
the password. When set to DISABLED, S8 cannot be used to clear the
password. The default is ENABLED.
Restrict NVRAM
Passwords from
upload/download
(Toggle)
Prevent passwords residing in NVRAM from being replaced when
downloading a configuration file. The default setting is DISABLED.
This prevents the passwords from being downloaded.