Enterasys Networks 6H2xx - Manual (Page 222)

Spanning Tree Port Configuration Screen
7-10 802.1 Configuration Menu Screens
7.4 SPANNING TREE PORT CONFIGURATION SCREEN
When to Use
To view the switch address of the selected STP VLAN ID, its VLAN age time, the total number of
ports, and the current MAC Address of a switch residing of each port.
The Spanning Tree Port Configuration screen is also used to allow or prevent ports from
participating in the default STP VLAN.
How to Access
Use the arrow keys to highlight the SPANNING TREE PORT CONFIGURATION menu item
on the Spanning Tree Configuration Menu screen, and press ENTER. The Spanning Tree
Configuration screen (
Figure 7-4 ) displays.
Screen Example
Figure 7-4 Spanning Tree Port Configuration Screen
CAUTION: This screen should be used only by personnel who are very knowledgeable
about Spanning Trees and how to develop them. Otherwise, the proper operation of the
network could be at risk.
40461_91
RETURN SAVE EXIT NEXT
Port #
1
2
3
4
5
6
7
8 MAC Address
00-00-1D-00-00-00
00-00-1D-00-00-01
00-00-1D-00-00-02
00-00-1D-00-00-03
00-00-1D-00-00-04
00-00-1D-00-00-05
00-00-1D-00-00-06
00-00-1D-00-00-07 State
forwarding
forwarding
forwarding
forwarding
forwarding
forwarding
forwarding
forwarding Status
[Enable]
[Enable]
[Enable]
[Enable]
[Enable]
[Enable]
[Enable]
[Enable]
Switch Address: 00-00-1D-00-00-00 Age Time: 300
STP VLAN ID: [ Default ] Number of Ports: 26
PREVIOUS