Enterasys Networks 6H2xx - Manual (Page 307)

Rate Limiting Configuration Screen
802.1p Configuration Menu Screens 9-43
9.8.2 Changing/Deleting Port Line Items
All, or one or more, line items containing the configured port and its priority, maximum rate, and
associated dropped frames can be changed/replaced or deleted as follows:
Changing One or More Line Items
To change the configuration values in a line item, that line item must be deleted and replaced with
a new entry with the correct configuration values. The new settings can then be configured and
added.
Deleting All Line Items
To delete all configured line items, use the arrow keys to highlight the DEL ALL command field
and press ENTER.
Deleting One or More Line Items
To delete one or more line items, mark each entry and then delete them, as follows:
1. Use the arrow keys to highlight a line to be deleted.
2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL
command is changed to DEL MARKED.
3. If more than one line item is to be deleted, repeat steps 1 and 2 to mark each line.
4. After the lines are marked, use the arrow keys to highlight the DEL MARKED command field.
5. Press ENTER. The marked line items are deleted and the DEL MARKED command is changed
back to DEL ALL.
NOTE: To remove a mark, perform steps 1 and 2 . When a marked line is highlighted,
pressing M will remove the mark. If all marks are removed, the DEL MARKED command
is changed back to DEL ALL
.