Enterasys Networks 6H2xx - Manual (Page 418)

Index-2
MuxReason 6-39
MuxState 6-39
PartnerChangeCount 6-39
PartnerChurnCount 6-39
PartnerChurnState 6-39
Port Instance 6-38
PsyncTransCount 6-39
RxState 6-38
UnknownRx 6-38
802.3ad System screen 6-44
screen fields
Number of Aggregators 6-45
Number of Ports 6-45
System Identifier 6-45
A
Acceptable Frame Type
setting of 8-21
Access Control List screen 5-25
screen fields
Access Control Lists 5-27
IP Addresses 5-27
MASK 5-27
Access policy 4-13 , 5-22
Advertised ability
setting of 6-12
Assigning Ports to a VID/Classification
all at a time 8-12 , 8-37
one or more at a time 8-12 , 8-37
Assigning VID/Classification to Port VLAN
Lists 8-38
Authentication Server 3-20
Authenticator 3-19
B
Broadcast Suppression Configuration screen 6-46
screen fields
Peak Rate 6-47
PORT # 6-47
Reset Peak 6-47
Threshold 6-47
Time Since Peak 6-47
Total RX 6-47
Built-in Commands
use of 12-2
C
Chassis Configuration screen 4-4
screen fields
Chassis Date 4-5
Chassis Time 4-5
Chassis Uptime 4-6
IP Address 4-5
MAC Address 4-5
Screen Lockout Time 4-6
Screen Refresh Time 4-5
Subnet Mask 4-5
setting a new screen refresh time 4-8
setting the chassis date 4-7
setting the chassis time 4-8
setting the screen lockout time 4-9
setting the subnet mask 4-7
Chassis date 4-5
Chassis Environmental Information screen 4-16
screen fields
Chassis Fan Status 4-17
Chassis Power Redundancy 4-17
Power Supply #X Status 4-17
Chassis Environmental Statistics Configuration
screen 11-14
screen fields
Chassis Fan Status 11-15
Chassis Power #1 Status 11-15
Chassis Power #2 Status 11-15
Chassis Power Redundancy 11-15
Chassis Menu screen 4-2
Chassis time 4-5
Chassis Uptime 4-6
Classification List 8-24 , 9-19
Classification Precedence Rules 8-29
Classification Rule
filtering traffic according to 13-32
CLEAR COUNTERS command
how to use 3-5
COM port 5-14
Command field 1-7
Command set 12-2