Enterasys Networks 6H2xx User Manual
Page 75
Radius Configuration Screen
Accessing Local Management
3-33
Last Resort
Action/Local
(Selectable)
Accept, Challenge, and Reject, which do the following:
ACCEPT: Allows local access (via COM port) at the super-user
level with no further attempt at authentication.
CHALLENGE: Reverts to local module (legacy) passwords.
REJECT: Does not allow local access.
For more details, refer to
To set local and remote servers, refer to
Last Resort
Action/Remote
(Selectable)
Accept, Challenge, and Reject, which do the following:
ACCEPT: Allows local access (via COM port) at the super-user
level with no further attempt at authentication.
CHALLENGE: Reverts to local module (legacy) passwords.
REJECT: Does not allow remote access.
For more details, refer to
To set local and remote servers, refer to
Radius Client
(Toggle)
Enable or disable client status.
IP Address
(Modifiable)
Enter the IP address (in decimal-dot format) of the primary and
secondary servers being configured for the Radius function.
Secret
(Modifiable)
Enter a secret string of characters or the primary and secondary server
(16 characters are recommended as per RFC 2865. The maximum is 32
characters).
Auth Port
(Modifiable)
Enter the number of the Authorization UDP Port for the Primary and
Secondary server.
Table 3-8
Radius Configuration Screen Field Descriptions (Continued)
Use this field…
To…