Enterasys Networks 6H2xx - Manual (Page 197)

Link Aggregation Screen (802.3ad Main Menu Screen)
Port Configuration Menu Screens 6-33
ActorPortPriority
(Modifiable) Set the priority value of this port (not used in this
implementation).
ActorAdminKey
(Read-Only)
See the administratively assigned key value for this port.
Only ports with matching keys may aggregate.
PartnerAdminPort
(Modifiable)
Enter a default value for PartnerOperPort when no protocol
partner is available.
ActorOperKey
(Read-Only)
See the current operation key for this port. Only ports with
matching operation keys may aggregate.
PartnerOperPort
(Read-Only)
See ActorPort on the partner switch that we are currently
attached to.
PartnerAdminSysPriority
(Modifiable)
Set a default value to use for the PartnerOperSysPriority
when no protocol partner is available.
PartnerAdminPortPriority
(Modifiable)
Set a default value to use for the PartnerOperPortPriority
when no protocol partner is available.
PartnerOperSysPriority
(Read-Only)
See the system priority of the partner port used to construct
this port’s LAG ID.
PartnerOperPortPriority
(Read-Only) See the port priority of the partner port (not used in this
implementation).
PartnerAdminSysID
(Modifiable)
Set a default value to use for PartnerAdminSysID when no
protocol partner is available.
ActorAdminState (hex)
(Modifiable)
Set the administrative value for this port’s Actor_State.
Allows administrative control over the values of
LACP_Activity, LACP_Timeout and Aggregation.
PartnerOperSysID
(Read-Only)
See system ID of this port’s partner.
Table 6-9 802.3ad Port Details Screen Field Descriptions (Continued)
Use this field… To…