Enterasys Networks 6H2xx - Manual (Page 129)

Module Configuration Menu Screen
Module Configuration Menu Screens 5-3
Menu Descriptions
Refer to Table 5-1 for a functional description of each menu item.
Table 5-1 Module Configuration Menu Screen Menu Item Descriptions
Menu Item Screen Function
GENERAL
CONFIGURATION Used to monitor and configure the switch module operating
parameters. For details, refer to
Section 5.2 .
SNMP
CONFIGURATION
MENU Used to access the SNMP Community Names Configuration, SNMP
Traps Configuration, and Access Control List screens. These screens
are used to modify SNMP community names, set SNMP traps and
provide additional security while managing the modules. For details,
refer to
Section 5.3 .
SYSTEM
RESOURCES
INFORMATION Displays the CPU type used in the module and its operating speed;
displays the size of each memory system used (FLASH memory,
DRAM and NVRAM) in the module and the unused portion of each
memory; and displays the current CPU (switch) utilization and the
peak switch utilization. For details, refer to
Section 5.7 .
FLASH
DOWNLOAD
CONFIGURATION Used to force the switch module to download a new image file from a
TFTP server to its FLASH memory. For details, refer to
Section 5.8 .
To prevent passwords from being downloaded and overwriting the
current passwords in memory, refer to the Security screen information
described in
Section 3.7 .
PORT
CONFIGURATION
MENU Used to select the screens for configuring the switch module ports. For
details, refer to
Section 6.1 .
802.1
CONFIGURATION
MENU Provides access to the Spanning Tree Configuration Menu screen, the
802.1Q VLAN Configuration Menu screen, and the 802.1p Priority
Configuration Menu screen. For details, refer to
Section 7.1 .
LAYER 3
EXTENSIONS
MENU Provides access to the IGMP/VLAN Configuration screen to configure
ports and VLANs to operate according to the Internet Group
Management Protocol (IGMP). For details, refer to
Chapter 10 .