Enterasys Networks 6H2xx - Manual (Page 235)

Static VLAN Configuration Screen
802.1Q VLAN Configuration Menu Screens 8-9
8.3.3 Renaming a Static VLAN
To change the name of an existing VLAN, proceed as follows:
1. Use the arrow keys to highlight the VLAN ID field near the bottom of the screen.
2. Type the VLAN ID number of the VLAN to be changed. Press ENTER.
3. Use the arrow keys to highlight the VLAN Name field near the bottom of the screen.
4. Type the new VLAN name of up to 32 ASCII characters in the VLAN Name field.
5. Press ENTER.
6. Use the arrow keys to highlight the ADD field and press ENTER. The new name is now
displayed.
8.3.4 Deleting a Static VLAN
To delete a VLAN from the VLAN list, proceed as follows:
1. Use the arrow keys to highlight the line containing the VLAN ID, FDB ID, and VLAN Name
information. The following message is displayed at the top of the screen:
“Hit <RETURN> key to edit port list, or <M> to mark.”
2. Press the M (not case sensitive) key, and an asterisk (*) appears to the left of the highlighted line.
If more than one VLAN is to be deleted, repeat steps 1 and 2 to highlight and mark each line.
Otherwise, go to step 4.
3. After the lines are marked, use the arrow keys to highlight the DEL MARKED command.
4. Press ENTER. The VLANs and marked line items are deleted from the list.
NOTE: The default VLAN cannot be deleted from the list.
NOTE: If for some reason you want to remove a mark, perform steps 1 and 2 to mark
the line. Then press M to delete the mark.