Enterasys Networks 6H2xx - Manual (Page 264)

Protocol Port Configuration Screen
8-38 802.1Q VLAN Configuration Menu Screens
Assigning One or More Ports Individually
1. Use the arrow keys to highlight the Classify field adjacent to the Port number.
2. Press the SPACE bar to toggle the Classify field to YES or NO. YES assigns the port to the
VID/Classification shown in the Classification Rule field. NO removes the port from the
Classification Rule.
3. If more than one port is to be added to the Classification Rule, repeat the first two steps for each
port.
4. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
5. Press ENTER. The message “SAVED OK” displays and the settings are saved.
Assigning All Ports Simultaneously
1. Use the arrow keys to highlight the SET ALL PORTS command field.
2. Press the SPACE bar to toggle the SET ALL PORTS field to YES or NO and press ENTER.
YES will set all the ports to the VID/Classification shown in the Classification Rule field. NO
will remove all ports from the Classification Rule.
3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4. Press ENTER. The message “SAVED OK” displays and the setting is saved.
Assigning VID/Classification to Port VLAN Lists
1. Use the arrow keys to highlight the SET PORTS TO VLAN FORWARDING command field.
2. Press the SPACE bar to toggle the SET PORTS TO VLAN FORWARDING command field to
YES or NO. Press ENTER.
YES will add the Classification Rule to the Port VLAN List of each port that has been set to YES
using one of the two procedures previously described. NO will remove the Classification Rule
from all the ports selected.
3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4. Press ENTER. The message “SAVED OK” displays and the setting is saved.