Enterasys Networks 6H2xx - Manual (Page 359)

Built-in Commands
Network Tools Screens 12-25
sat_size
Description:
Allows configuration of the size off the Source Address Table (Forwarding
Database) on the device to either 8000 or 16000 entries. The default is 8000
entries. When set to 16000, 400 Layer 2/3/4 VLAN Classification and Priority
Assignment entries will be supported. The default is 1000 Layer 2/3/4 VLAN
Classification and Priority Assignment entries. Changing of sat_size will lead
to a reset of the board.
Syntax:
sat_size [ 8 | 16 | status ]
Options: None
Example: -> sat_size_status
suppress_topology_traps
Description:
Enables or disables the generation of topology traps on inter switch links.
Only inter switch link ports that transition to forwarding or blocking cause
the switch to issue a topology trap. By default, this feature is disabled and
will allow the generation of topology traps.
Syntax: suppress_topology_traps [ enable | disable ]
Options: enable – Suppresses the generation of topology traps.
disable – Allows the generation of topology traps.
Example: -> suppress_topology_traps enable
-> suppress_topology_traps disable