2 setting the reset peak, Setting the reset peak -48, Section 6.9.2 – Enterasys Networks 6H2xx User Manual
Page 212
Advertising
Broadcast Suppression Configuration Screen
6-48
Port Configuration Menu Screens
6.9.2
Setting the Reset Peak
To set the Reset Peak field to YES or NO, proceed as follows:
1. Use the arrow keys to highlight the Reset Peak field for the selected port.
2. Press the SPACE bar to select YES or NO.
3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4. Press ENTER. The message “SAVED OK” displays and the Time Since Peak field is also reset.
Advertising