Enterasys Networks 6H2xx - Manual (Page 239)

Static VLAN Egress Configuration Screen
802.1Q VLAN Configuration Menu Screens 8-13
3. To change the egress type on more than one port, repeat the first two steps for each port.
4. After the changes are complete, use the arrow keys to highlight the SAVE command at the
bottom of the screen.
5. Press ENTER. The message “SAVED OK” displays and the settings are saved.
Setting the Same Egress Type on All Ports Simultaneously
1. Use the arrow keys to highlight the SET ALL PORTS field. The following message appears at
the top of the screen:
TOGGLE TO DESIRED SELECTION AND HIT <RETURN> TO PROPAGATE
SELECTION TO PORTS
2. Press the SPACE bar to step to the appropriate egress type (UNTAGGED, TAGGED, or NO)
and press ENTER.
3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
4. Press ENTER. The message “SAVED OK” displays and the screen refreshes showing all ports
associated with the VLAN that are set to the selected egress type.
8.4.2 Displaying the Next Group of Ports
Up to 32 ports can be displayed on the screen. If there are more than 32 ports associated with the
VLAN, additional screens will contain the additional list of ports.
To display the additional port settings that do not display in the current screen, use the NEXT or
PREVIOUS commands, as follows:
1. To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the
entries on the next screen.
2. To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to
view the entries on the previous screen.
NOTE: The NEXT and PREVIOUS fields will only display if there are further egress lists
to page through.