Enterasys Networks 6H2xx - Manual (Page 318)

IGMP/VLAN Configuration Screen
10-8 Layer 3 Extensions Menu Screens
3. Use the SPACE bar to select ENABLED, DISABLED, or DELETE. If a specific VLAN was
chosen in step 1 , ENABLED and DISABLED are used to enable or disable the IGMP
configuration of the chosen VLAN. (DELETE will remove the IGMP configuration of the
VLAN.)
4. Use the arrow keys to highlight the IGMP Version field. Then use the SPACE bar to select the
proper IGMP version for the VLAN shown in the VLAN ID field.
5. Use the arrow keys to highlight the remaining fields: Query Interval, Query Response Time,
Interface Robustness, Last Member Query Interval, and Switch Query IP. Enter the desired
numbers in each field.
6. Use the arrow keys to highlight the SAVE command and press the ENTER key to save the
information in all the fields that were changed. Repeat this procedure for each VLAN that you
want to configure for IGMP.
NOTE: When configuring IGMP, it is advisable to follow the IGMP configuration rules in
RFC 2236 concerning switches, and routers.